C2-260/inBio2-260 Access Control Panel
User Manual
Page | 41 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
1. Not all devices support the “Disabled” function. When a user adds a device, the system will notify
the user whether the current device supports this function or not. Please upgrade the device to
use this function.
2. Not all the devices support the ”Set Valid Time” function. Some devices only allow the users to
set the year, month, and day of the local time. When a user adds a device, the system will notify
the user whether the current device supports this function or not. Please upgrade the device to
use this function.
3. Click Personnel Detail to access the details and editing interface and enter the information.
4. After entering the information, click OK to save and exit, the personal details will be displayed in
the added list.
Access Control Settings 5.6
The Access Control system can set the access levels of the registered users, namely, allowing some
personnel to open some doors by verification during a period. Access Control System Management
primarily includes Access Control Time Zones, Access Control Holiday, Door Settings, Access Levels,
Personnel Access Levels, Real-Time Monitoring, and Reports, etc.
Access control system parameters
• 255 time zones.
• Unlimited access levels.
• Three-holiday types and 96 holidays in total.
• Anti-passback function.
• Multi-Card Opening function.
• Real-time monitoring.
• Interlock function.
• Linkage function.
• First-Card Normal Open function.
• Reader Settings.
• Auxiliary I/O Settings.
For more details, please refer to “ZKBioAccess User Manual.”
Real-time monitoring 5.7
Click
Access Device > Real-Time Monitoring
.
It monitors the status and real-time events of doors configured to the access control panels in the system
To Next Page
Loading...
Need help?
General
