ZKTeco C2-260/inBio2-260 - User and Card Management; Add User and Card

C2-260/inBio2-260 Access Control Panel User Manual
Page | 35 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
 View Device Capacity
It displays the capacity of personnel’s biometric details in the device.
 Modify IP Address
Select a device and click [Modify IP address] to open the modification interface. It will obtain a real-time
network gateway and subnet mask from the device. (Failed to do so, you cannot modify the IP address).
Then enter a new IP address, gateway, and subnet mask. Click OK to save and quit. This function is similar
to [Modify IP Address Function] in Device
.
 Modify Communication Password