EFace10 User Manual
Page | 14 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
After successful verification, the prompt box displays "Successfully verified", as shown below:
1.5.3 Password Verification
The device compares the entered password with the registered password by the given User ID.
Click the button on the main screen to enter the 1:1 password verification mode. Then, input the user
ID and press [OK].
If the user has registered face and card in addition to password, and the verification method is set to
password/face/card verification, the following screen will appear. Select the icon to enter password
verification mode.
Input the password and press [OK].
To Next Page
Loading...
Need help?
General
