EFace10 User Manual
Page | 26 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
TCP COMM. Port
The default TCP COMM Port value is 4370. It can be modified according to the
network availability.
DHCP
It stands for Dynamic Host Configuration Protocol. It dynamically allocates IP
addresses for clients via server.
Display in Status Bar
Toggle to set whether to display the network icon on the status bar.
PC Connection 5.2
Comm Key facilitates to improve the security of data by setting the communication between the device
and the PC. Once the Comm Key is set, a connection password is required to connect the device to the PC
software.
Tap PC Connection on the Comm. settings interface to configure the communication settings.
Function Description
Function Name Descriptions
Comm Key
The default password is 0 and can be changed later.
The Comm Key can contain1-6 digits.
Device ID
It is the identification number of the device, which ranges between 1 and 254.
Wireless Network
5.3
The device provides a Wi-Fi module, which can be built-in within the device module or can be externally
connected.
The Wi-Fi module enables data transmission via Wi-Fi (Wireless Fidelity) and establishes a wireless network
environment. Wi-Fi is enabled by default in the device. If you don't need to use the Wi-Fi network, you can
toggle the Wi-Fi to disable the button.
Tap Wireless Network on the Comm. settings interface to configure the Wi-Fi settings.
To Next Page
Loading...
Need help?
General
