EFace10 User Manual
Page | 25 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
5 Communication Settings
Tap COMM. on the Main Menu to set the relevant parameters of Ethernet, PC Connection, Wireless
Network, Cloud Server, and Network Diagnosis.
Ethernet Settings 5.1
When the device needs to communicate with a PC over the Ethernet, you need to configure network
settings and ensure that the device and the PC are connect to the same network segment.
Tap Ethernet on the Comm. Settings interface to configure the settings.
Function Description
Function Name Descriptions
IP Address
The default IP address is 192.168.1.201. It can be modified according to the
network availability.
Subnet Mask
The default Subnet Mask is 255.255.255.0. It can be modified according to the
network availability.
Gateway
The default Gateway address is 0.0.0.0. It can be modified according to the
network availability.
DNS
The default DNS address is 0.0.0.0. It can be modified according to the
network availability.
To Next Page
Loading...
Need help?
General
