EFace10 User Manual
Page | 28 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Advanced Setting
On the Wireless Network interface, tap on Advanced to set the relevant parameters as required.
Function Description
Function Name Description
DHCP
Dynamic Host Configuration Protocol (DHCP) dynamically allocates IP addresses
to network clients. If the DHCP is enabled, then the IP cannot be set manually.
IP Address
The
IP address for the WIFI network, the default is 0.0.0.0. It can be modified
according to the network availability.
Subnet Mask
The default Subnet Mask of the WIFI network is 255.255.255.0. It can be modified
according to the network availability.
Gateway
The default Gateway address is 0.0.0.0. It c
an be modified according to the
network availability.
Cloud Server Setting 5.4
Tap Cloud Server Setting on the Comm. settings interface to connect with the ADMS server.
To Next Page
Loading...
Need help?
General
