EFace10 User Manual
Page | 49 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
All Work Codes 12.2
You can view, edit and delete work codes in All Work Codes. The process of editing a work code is the
same as adding a work code, except that the ID is not allowed to be modified.
Work Code Options 12.3
To set whether entering the work code is a must and whether the entered work code must exist during
authentication.
In 1: N or 1:1 verification, the system will automatically pop up the following window. Select the
corresponding Word Code manually to verify successfully.