ZKTeco EFace10 - Face Parameters

EFace10 User Manual
Page | 32 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Periodic Del of ATT
Data
When attendance records reach its maximum storage
capacity, the device
automatically deletes a set of old attendance records.
Users may disable the function or set a valid value between 1 and 999.
Periodic Del of ATT
Photo
When attendance photos reach its maximum storage
capacity, the device
automatically deletes a set of old attendance photos.
Users may disable the function or set a valid value between 1 and 99.
Periodic Del of
Blocklist Photo
When block listed photos reach its maximum storage
capacity, the device
automatically deletes a set of old block listed photos.
Users may disable the function or set a valid value between 1 and 99.
Authentication
Timeout(s)
The amount of time taken to display a successful verification message.
Valid value: 1~9 seconds.
Face comparison
interval (s)
The amount of time required to compare facial templates.
Valid value: 0~9 seconds.
Face Parameters 6.3
Tap Face on the System interface to go to the face parameter settings.