EFace10 User Manual
Page | 38 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
New Bell Schedule
Tap New Bell Schedule on the Bell Schedule interface to add a new bell schedule.
Function Description
Function Name Description
Bell Status
Toggle to enable or disable the bell status.
Bell Time
Once the required time is set, the device will automatically trigger to ring the bell
during that time.
Repeat
Set the required number of counts to repeat the scheduled bell.
Ring Tone
Select a ring tone.
Internal bell delay(s)
Set the replay time of the internal bell. Valid values ranges from 1 to 999
seconds.
All Bell Schedules
Once the bell is scheduled, on the Bell Schedules interface, tap All Bell Schedules to view the newly
scheduled bell.
To Next Page
Loading...
Need help?
General
