COMMUNICATION
19
3
Select Server mode as “PUSH” as shown above.
It refers to your push server address.
Here the “URLMode” is OFF”. You can turn the “URLmode” ON .
You can turn ON the wireless network and
the networks available in the range would be
displayed as above.
You can select any wireless network you wish to
connect and you can upload the password via
“USB” or by using the keypad on the clock.
Once you upload the password you can press
“Connect to Wi-Fi (OK)” and the following net-
work will get connected.
See NOTE below
3.5 CLOUD SERVER SETTINGS
Click on
Cloud Server Setting
NOTE: The new le name for uploading Wi-Fi password or URL Webserver: updataoptions2.cfg
Inside this le you can either use: WirelessKey= [for uploading Wi-Fi password] or ICLOCKSVRURL= [for uploading webserver URL]
The clock won’t accept saving those two congurations under the same le name. Our suggestion would be to save one separate le for Wi-Fi and one for URL.
To Next Page
Loading...
