G4 User Manual
Menu Options
Function Description
Show Employee Photo
After Verification
If it is enabled, the employee photo will be displayed; if not, the employee photo will not
be displayed.
ATT Log Alert
When the remaining record space reaches a set value, the device will automatically
display a remaining record memory warning. When the value is set as 0, the function is
disabled.
Cyclically Delete ATT
Data
When the attendance record memory has reached full capacity, the device will
automatically delete a set value of old attendance records. When the value is set as 0, the
function is disabled.
Cyclically Delete ATT
Photos
When the space storing the attendance photos have reached full capacity, the device
will automatically delete a set value of old attendance photos. When the value is set as 0,
the function is disabled.
Cyclically Delete
Blacklist Photos
When the space storing blacklisted photos have reached full capacity, the device will
automatically delete a set value of old blacklisted photos. When the value is set as 0, the
function is disabled.
Verify Message Display
Delay
This is the length of time that an employee’s information will display on the system's
screen after successful verification. Unit: seconds.
To Next Page
Loading...
Need help?
General
