G4 User Manual
Menu Options
Function Description
Door Lock Delay
When the door opens, the lock begins to count down. When the time is over, the lock
will close.
Door Sensor Delay
When the door opens, the door delay timer starts counting down. When the countdown
is completed, the system will send an alarm signal from the local, then the door sensor
delay timer will continue to be effective.
Type of Door Sensor
There are different types of door sensors. Subject to different locations, the status value
of the door sensor is different; the value of the magnetic door in the “always open”
mode is the opposite of that in the “always close” mode .
Door Alarm Delay
When the door delay ends and the status of the door is not “closed”, the door alarm
delay timer will start counting down. When the countdown is completed and the status
is still not “closed”, an external alarm signal will be transmitted and output to relay.
Alarm Switch From
Local
To transmit a sound alarm signal from the local, then send an unpack alarm signal. When
the door is closed, the system will cancel the alarm from the local. After the signal is
successfully confirmed, the alarm will be cancelled from the local.
Note: Registered employees need to fulfil certain conditions before unlocking the system, which means that the
current unlock time should be within the effective time period, or the door cannot be opened.
To Next Page
Loading...
