5
ULTIMA INSTALLATION GUIDE | 2019 - v1
IMPORTANT
To avoid damaging the main board, always wear an anti-
static wrist strap when touching the main board in any way,
including connecting and disconnecting wires.
• Do not remove the cover assembly from its anti-static packaging
until you are ready to install the device.
• Save the paper mounting template and any other printed
documents.
Required tools
Note: Because of the small size of certain screws, we recommend
that you use small screwdrivers with magnetic tips.
Tape Measure
Screwdrivers Drywall Knife Power Drill
Level Wire Cutter
To Next Page
Loading...
