⚫ Non-professionals are strictly prohibited to operate. Specifically,
professionals who had been trained related electrical equipment,
or who master electrical knowledge.
⚫ Please be sure to read the product instruction manual and safety
precautions carefully before installation.
⚫ Before installation, please ensure that the product is powered off.
⚫ Do not disassemble the module, otherwise the machine may be
damaged.
⚫ Avoid direct sunlight installation.
⚫ In order to facilitate ventilation and controller replacement, 2-3cm
should be left between the upper and lower parts of the controller
and the installation environment and surrounding components.
⚫ Considering the convenient operation and maintenance of the
controller, please do not install the controller in the following
places:
a) places where the surrounding ambient temperature exceeds
the range of -20° C-60° C
b) places where the ambient humidity exceeds the range of 10%-
95% (non-condensing)
c) places with corrosive gases and flammable gases
d) places with many conductive powders such as dust and iron
powder, oil mist, salt, and organic solvents
To Next Page
Loading...
Need help?
General