ZMC420SCAN Motion Controller Hardware Manual V1.5
Chapter I Production Information
1.1. Product Information
ZMC is the abbreviation of the network motion controller model launched by ZMotion
Technology.
ZMC4XX series controllers support Zmotion XPLC function, which means it can do
configuration display through the network.
ZMC420SCAN Laser-Galvanometer Motion Controller is a kind of standalone motion
controller that integrates laser control, galvanometer control and bus axis / pulse axis
control. Controller itself supports two groups of XY-SCAN and it supports up to 20 axes
complex continuous trajectory control requirements to achieve hybrid interpolation
among galvanometer axis, bus axis and pulse axis.
ZMC4 series high-performance multi-axis motion controllers can be applied in
robots (SCARA, Delta, 6 joints), electronic semiconductor equipment (testing equipment,
assembly equipment, locking equipment, soldering machine), dispensing equipment,
non-standard equipment, printing and packaging equipment, textile and garment
equipment, stage entertainment equipment, medical equipment, assembly line, etc.
1.2. Function Features
◆ Motion control of up to 20 axes.
◆ Pulse output mode: pulse / direction or dual pulses or quadrature pulse.
◆ Two groups laser galvanometer interfaces, and support XY2-100 protocol.
◆ Support encoder position measurement, which can be configured as handwheel
To Next Page
Loading...
Need help?
General