Zmotion ZMC420SCAN - Chapter V Program & Applications; 5.1. ZDevelop Software Usage

ZMC420SCAN Motion Controller Hardware Manual V1.5
Chapter V Program & Applications
5.1. ZDevelop Software Usage
ZDevelop is a PC-side program development, debugging and diagnostic software for
the ZMoiton series motion controllers of Zmotion Technology. Through it, users can easily
edit and configure the controller program, quickly develop applications, diagnose system
operating parameters in real time, and watch the motion controller. The running program
is debugged in real time and supports Chinese and English bilingual environments.
ZBasic, ZPLC and ZHMI can run multi-tasks, and ZBasic can run multi-tasks, and can
be mixed with ZPLC and ZHMI.
Step
Operations
Display Interface
1
Open ZDevelop,
click “File” –
“New Project”,
Save as window
will pop up, then
enter file name,
save the project
file with suffix
“zpj.”.