You can switch the 3030 Effect mode OFF temporarily (this is called "bypass"), and monitor the instrument's
direct sound. This is a handy function for checking how the effects are working.
Temporarily Switching Effect Sound OFF and Outputting Original Sound (Bypass Function)
■
9
LET' S LISTEN TO SOME PATCHES
Step on the foot switch for the currently selected
patch number (the foot switch whose LED is lit) and
release your foot straight away.
If you lightly step on the foot switch and then release your foot
within a second, the 3030 will enter the Bypass status. The LED
for the currently selected patch will flash, and the tuner LED will
light. Also, the display will indicate the Bypass status
with "", and then change to "".
To release this status, lightly step on and release
your foot from the foot switch again, or select another
patch.
The 3030 will return to the usual Play mode.
2
1
To Next Page
Loading...
Need help?
General
