135
Test Modem
Most users should leave the default setting of Normal operations.
If your DLNA/UPnP compatible device is having trouble
connecting to the media server you can try setting either UPnP
Certified or DLNA Certified.
Scanning
Method
If you want to limit the file types that can be played by your
DLNA/UPnP compatible device select Scan by File Type.
Otherwise leave the default value of Scan All Files.
For example if you just want to play videos on your DLNA/UPnP
compatible device select Scan by File Type. Under Available
File Types in the Video column select the file types you want to
be able to play and click Selected. If you want to be able to play
all file types select All Video. All Video will select all video
formats shown. After selecting which file types click Apply Scan
Settings then click on Scan Now. Scanning may take several
minutes depending on the size of your USB drive.
The Scanning Status field at the top of the page will indicate that
the Cable Modem/Router is scanning your USB drive. If it does not
return to Ready after a few minutes refresh the page.
Note: If you do not run the scan, than all file types will still be
visible to your DLNA/UPnP compatible device. If you are using the
default setting of Scan all Files it is not necessary to scan your
USB device.
To Next Page
Loading...
