140
http://192.168.0.1 into the browser’s address bar, and press ENTER to go
to that address. When the modem/router’s user interface comes up, enter
the username and password for the user interface and click Login.
(These are both admin unless you changed them.) Go to the Wireless
section and then click on Primary Network in the menu on your left. A
new page will come up with the Network Name (SSID) and WPA
Pre-Shared Key (wireless password) shown.
Problem: What if I'm told that Model 5354 Cable Modem/Router isn't approved
for my cable modem service?
Solution:
This product has been certified by CableLabs
®
, the cable service
provider’s primary test lab. However, some cable service providers have
their own certification process. To see whether model 5354 is certified by
your cable service provider, you should be able to check your service
provider’s Web site or to speak with someone from your service provider.
To Next Page
