Setting the looper
Setting of the loop recording time
1.
Turn .
Setting Explanation
MANUAL
Recording will continue until stopped manually or the maxi-
mum recording time is reached.
×1–64
Set the value to 1 – 64 quarter notes. The actual recording time
depends on the BPM setting.
Recording time (seconds) = 60 ÷ BPM × quarter notes
NOTE
• The looper recording time is between 1.5 and 30 seconds.
• Settings that will not t in the recording time will be adjusted automatically.
• Changing the recording time will delete the recorded data.
Setting how looping stops
1.
Turn .
Setting Explanation
Instant Stops immediately after the stop operation.
Finish The loop will stop after playing to its end.
Fade Out The loop will stop after fading out.
Adjusting the tempo
1.
Turn .
NOTE
Changing the tempo will delete the recorded data.
HINT
• This can be set from 40 to 250.
• The tempo set here will be shared by the effects and the rhythm.
48