Zoom G1 Four User Manual

Adjusting the pedal
Adjusting the pedal sensitivity
1.
While pressing , turn the power on.
This opens the PEDAL CALIBRATION screen.
2.
Operate the pedal as shown on the display, and press or each time.
Calibration is nished when “Complete!” appears.
NOTE
• Adjust the pedal sensitivity in the following cases.
– Stepping on the pedal has little effect.
– The volume and tone changes greatly even when the pedal is only pressed lightly.
• If “Error!” appears, start calibration again from the beginning.
54

Zoom G1 Four Specifications

General

Best uses	Guitar
Product type	Expression pedal
Product color	Black
Power consumption	500 mA
Power source type	AC, Battery
Number of batteries supported	4
DC-in jack	Yes

Weight and Dimensions

Depth	156 mm
Width	130 mm
Height	42 mm
Weight	340 g