Zoom G2 FOUR User Manual

Screens that appear on the display
The G2 FOUR/G2X FOUR is operated with buttons and knobs while viewing the display.
This section explains the screens shown on the display.
Memory Screen
This opens when the power is turned on.
This shows patch memories, allowing them to be selected for performing and editing.
❶
Patch memory numbers
Footswitches – can be used to select the patch memories that are shown currently.
Use / to select a patch memory one lower or higher. Use and to select a patch
memory 10 places away.
The selected patch memory is highlighted.
❷
Patch memory name
This shows the name of the selected patch memory.
Opening the Memory Screen
• When the MENU Screen or Effect Screen is open: Press .
• When the Library Screen is open: Confirm the selected effect to open the Effect Screen, and press
.
12

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)