Zoom G2 FOUR User Manual

Turning the power on/off
Turning the power on
1. Minimize the volume of the amp or powered monitors.
NOTE:
To prevent noise and malfunction, connect powered monitors or a guitar amp before turning the power on.
2. Set to ON.
This turns on the G2 FOUR/G2X FOUR and opens the Output Setting Screen.
3. Use and to select the type of output, and press .
Setting Explanation
AMP Sound suitable for a guitar amp will be output.
LINE Sound suitable for headphones and monitor speakers will be output.
Notes about the start-up output setting:
• By default, the Output Setting Screen is set to open at start-up (“YES” setting), so the type of output can
be selected at start-up every time.
• Showing the Output Setting Screen at start-up can also be disabled (“NO” setting). (→Changing the start-
up setting)
20

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)