Zoom G2 FOUR User Manual

Copying and saving patch memories
The AUTO SAVE function is on by default. When it is off, changes, including adjustments to effects and
amps, as well as volume settings, will not be saved automatically. Save changes manually in this case.
Patch memories can also be saved (copied) to other locations.
HINT:
See “Setting the AUTO SAVE function” for details about the AUTO SAVE function.
1. Press and hold to open the MENU Screen.
2. Use / to select COPY, and press the corresponding footswitch ( in this example).
This opens the Copy Screen.
“SAVE” will be shown instead of “COPY” when the AUTO SAVE function is OFF (→Setting the AUTO SAVE
function), so select “SAVE”.
44

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)