Zoom G2 FOUR User Manual

Creating patch memories
New patch memories can be created.
1. Press and hold footswitch .
This opens the New Screen.
2. Use and to select where the new patch memory will be saved, and press .
This creates a new patch memory and opens the Effect Screen.
Assign effects by following the procedures in “Replacing effects” and edit the patch memory.
NOTE:
Up to 300 patch memories can be saved. The New Screen will not be shown if there are no empty patch
memories. Delete unnecessary patch memories to enable use. (→Deleting patch memories)
HINT:
In step 2, pressing to select “CANCEL” and pressing will cancel creation and reopen the
Memory Screen.
48

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)