Zoom G2 FOUR User Manual

Terms used in this manual
Patch memory
Patch memories store effects and amps used, effect on/off states and parameter setting values, allowing
easy recall. Effects are saved and recalled in units of patch memories. A single patch memory can include
up to 6 effects plus 1 pedal effect. Up to 300 patch memories can be saved.
Effect type
The available effect types include various guitar effects and amp/cabinet simulation models. Effects can be
selected from these types to be added to patch memories.
Category
Effects are grouped by type into categories.
Auto save
This function automatically saves changes to patch memory and effect settings.
ECO mode
This function will automatically turn the power off 10 hours after the last operation.
Looper
Mono phrases that are up to 80 seconds long can be recorded and played back repeatedly.
This can be synchronized with rhythm patterns.
Preselect
This function allows continued use of the current patch memory sound while switching to another patch
memory at a distant number.
3

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)