Zoom G2 FOUR User Manual

Looper operations
Looper recording, playback and other operations can be conducted when the looper effect is shown on the
Effect Screen.
HINT:
• During looper recording and playback, it will continue recording or playing even if is
pressed to switch to the Memory Screen. In this case, switching the patch memory will stop recording/
playback.
• Pressing / to open the Library Screen will stop recording/playback and erase the recorded
data.
Recording loops
1. When a loop has not yet been recorded, press the – footswitch that corresponds to the
looper effect ( in this example).
Recording will start and the indicator will light.
Press the footswitch with the lit indicator 2 times to cancel recording.
71

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)