Zoom G2 FOUR User Manual

Using the PRESELECT function
The PRESELECT function can be used when the Memory Screen is open.
When the PRESELECT function is ON, using / / / will put the patch memory change
into standby until footswitch – is pressed to confirm the change.
This makes it possible to switch directly to a patch memory that is not near the current one during live
performance.
Turning the PRESELECT function on/off
1. Press and hold to open the MENU Screen.
2. Use / to select PRE-SELECT, and press the corresponding footswitch ( in this example).
This opens the Preselect Screen.
25

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)