Zoom G2 FOUR User Manual

Editing effects (Effect Screen)
Use the Effect Screen to work with effects, including, changing them and adjusting their parameters.
Patch memories can be edited.
Saving changes:
• When the AUTO SAVE function is ON, changes to patch memories will be automatically saved. (This
function is ON by default.) (→Setting the AUTO SAVE function)
• Patch memories will not be saved automatically if the AUTO SAVE function is OFF. When the content of a
patch memory has been changed, will appear at the top right of the display, showing that it is
different from the saved settings.
Save it as necessary. (→Copying and saving patch memories)
Opening the Effect Screen
1. On the Memory Screen, use and to select the patch memory with the effect to be edited
(→Switching patch memories while playing (Memory Screen)).
29

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)