Zoom G2 FOUR User Manual

2. Use and to show the icon for the desired setting item.
See the reference links for details about each setting.
Change the effect order.
(→Changing the order of effects)
Change the patch memory name.
(→Changing patch memory names)
Save and copy patch memories.
(→Copying and saving patch
memories)
Delete patch memories. (→Deleting
patch memories)
Select the type of equipment
connected to the G2 FOUR/G2X
FOUR output. (→Selecting the type
of connected equipment)
Turn the automatic saving function
on/off. (→Setting the AUTO SAVE
function)
Turn the pre-selection function
on/off. (→Using the PRESELECT
function)
Turn the ECO mode on/off.
(→Setting the ECO mode)
Turn on/off showing of the output
setting at start-up. (→Changing the
start-up setting)
Adjust the display contrast.
(→Adjusting the display contrast)
Restore factory default settings.
(→Restoring factory default
settings)
Adjust the sensitivity of the built-in
expression pedal. (G2X FOUR only)
(→Calibrating the pedal (G2X FOUR
only))
Check the firmware versions.
(→Checking the firmware versions)
3. Press a – footswitch that corresponds to an icon.
This opens the selected settings screen.
For example, press when OUTPUT is selected.
16

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)