Zoom G2 FOUR User Manual

HINT:
Turning will open the Effect Editing Screen where parameters for the selected effect can be adjusted.
(→Adjusting effect parameters)
5. Press .
The selected effect or amp will replace the previous one and the Effect Screen will reopen.
NOTE:
• If an effect in a patch memory has been deleted from Handy Guitar Lab, the deleted effect will appear as
and be disabled.
• A patch memory can only contain one effect from each of these categories: amp, pedal, rhythm and
looper.
• When the Library Screen is open, sound is output using only the selected effect. To check the sound of
the entire patch memory, open the Memory Screen or the Effect Screen.
HINT:
See Handy Guitar Lab for explanations of each effect.
Adding effects
When a number icon like is shown, no effect has been assigned to that position. To add an effect,
select a number icon in step 2. Then, select an effect starting in step 3.
The position of an added effect can be changed by following the instructions in “Changing the order of
effects”.
Deleting effects
Select the effect to be deleted in step 2. Then, select a number icon like in step 4.
34

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)