Zoom G2 FOUR User Manual

Setting the stop mode
How the looper behaves when stopped can be set.
1. Turn on the Looper Effect Setting Screen (→ Setting the looper effect).
Setting Explanation
INSTANT The loop will stop playing immediately after a stop operation.
FINISH The loop will stop after playing to its end.
FADE OUT The loop will stop playing after fading out.
Adjusting the volume
The looper volume can be adjusted.
1. Turn on the Looper Effect Setting Screen (→ Setting the looper effect).
HINT:
This can be set from 0 to 100.
69

Zoom G2 FOUR Specifications

General

Rhythm Patterns	68
Simultaneous Effects	7
Sampling Frequency	44.1 kHz
A/D/A Conversion	24-bit
Rated Input Level	-20 dBu
Maximum Output Level	+5 dBu
Output Impedance	1 kΩ
USB Audio Interface	2 in / 2 out
Amp Models	22
Input	1/4" phone jack
Output	1/4" phone jack
Headphones	1/8" stereo phone jack
Power Supply	AA batteries or AC adapter
Frequency Response	20 Hz - 20 kHz
Input Impedance	470 kΩ
Expression Pedal	Yes
Inputs	1 x 1/4" (guitar)
Outputs	1 x 1/4"
Effect Types	79 (G2 FOUR) / 82 (G2X FOUR)