Zoom H3-VR User Manual

6. Use and to select "Set (with Tone)", and press .
This starts output of the test tone.
No test tone will be output if “Set” is selected.
7. Use and to adjust the line output level.
While checking the audio level meter of the other device, adjust the audio signal level so that it never
exceeds −6 dB.
HINT
• This can be set from -40 to 0 dB.
8. Adjust the input gain of the other device.
While checking the audio level meter of the connected device, make adjustments to the input gain of that
device until the audio signal level is about −6 dB.
9. Press .
This stops test tone output.
NOTE
• See the operation manual of the connected device being used for information about its operation.
• If the automatic gain control function on the other device is on, turn it off.
• The test tone is output from both the LINE OUT and PHONE OUT jacks.
• Be careful with the volume if you are monitoring the sound with headphones, for example.
HINT
• The test tone is a 1kHz sine wave at -6 dBFS.
76

Zoom H3-VR Specifications

General

Sample rate	96 kHz
Audio quality	24 bit
Interface	USB 2.0
USB 2.0 ports quantity	1
Product color	Black
LED indicators	Yes

Weight and Dimensions

Weight	120 g
Dimensions (WxDxH)	76 x 78 x 123 mm