Responding to Alert Messages
If one of the messages below appears, follow the instructions to respond to it.
Ӎ
Alert messages that appear during startup
Message Explanation and response
Date/Time Reset
The date and time setting was initialized. Reset the time (
“Setting the date
and time” on page 95).
Ӎ
Alert messages that appear when using batteries
Message Explanation and response
Low Battery!
The remaining battery charge has become low. Replace the batteries with new
ones or connect the AC adapter.
No Battery Charge!
When the battery charge becomes low, this appears before the power turns off
automatically. Replace the batteries with new ones or connect the AC adapter.
Ӎ
Alert messages that appear when the Recording Screen is open
Message Explanation and response
Cannot Create File!
The maximum number (500) of folders and les that can be created on the same
level of the microSD card has been reached. Delete unneeded folders and les or
record to a different location.
Card Full!
The microSD has become full. Delete unneeded data or replace it with a new
microSD card.
File Number Limit Reached! The le number limit (999) has been reached.
No SD Card! No microSD card is loaded. Load a microSD card.
Mark Limit Reached! The maximum number of marks (99) in one le has been reached.
Invalid SD Card!
The SD card is invalid. Formatting the card with the might make it
usable.
Now Recording!
The power cannot be turned off during recording. Stop recording before turning
the power off.
SD Write Error Mark
A writing error occurred because the writing speed to the microSD card was
insucient. We recommend using a microSDHC/SDXC card that has been con-
rmed to operate with this recorder. A list of conrmed microSDHC/SDXC cards
can be checked on the ZOOM website (www.zoom.co.jp).
112
To Next Page
Loading...
Need help?
General
Weight and Dimensions
