3. Tap where the rendered stereo WAV file should be saved.
Setting Explanation
To SD Card This renders to the SD card.
To USB Memory This renders to the USB flash drive.
4. Input the file name.
See Character Input Screen overview for how to input characters.
NOTE:
• An error message will appear if a file with the same name already exists. If this happens, change the file
name.
• Duplication is not possible if the SD card or USB flash drive does not have enough open space.
5. When “Done” appears, tap “Close”.
This completes rendering of the WAV file and reopens the Project Settings Screen.
134
To Next Page
Loading...
