Zoom R20 - Making Audio Interface Settings

Making audio interface settings
Settings can be made, including for the monitoring sound and output level.
Setting direct monitoring
This directly outputs the sound being recorded by the R20 before sending it to the computer, smartphone
or tablet. This enables monitoring without latency (direct monitoring).
1. Tap on the audio interface Level Meter View Screen.
2. Tap “Direct Monitor” “On” or “Off”.
Setting Explanation
Off This turns off direct monitoring. This outputs the sound being
recorded by the R20 after sending it to the computer, smartphone or
tablet.
On This turns on direct monitoring.
NOTE:
• When in Multi Track mode (→ Connecting computers, smartphones and tablets), the direct monitoring
sound is from the pre-fader mix, so fader adjustments will not affect the volume.
• When in Stereo Mix mode (→ Connecting computers, smartphones and tablets), the direct monitoring
sound is from the post-fader mix, so fader adjustments will affect the volume.
142