Zoom R20 - Metronome and Click Track Features; Metronome Setup and Sounds

Setting the metronome
The R20 has a metronome with a precount function.
This metronome, which can function during recording and playback, has switchable sounds and precount
on and off settings.
Moreover, the metronome volume can be adjusted for different outputs, for example, to make the sound
loud only in headphones.
Using the metronome
Set whether the metronome is used during recording and playback.
1. On the Project Settings Screen, tap “On” or “Off” for “Click”.
Setting Explanation
Off Do not use the metronome.
On Use the metronome.
HINT:
The metronome can also be switched on/off by pressing on the Home Screen.
38