Setting the date and time (first time starting up)
The first time the power is turned on after purchase, set the date and time when the Date/Time Setting
Screen opens. This is used to add the date and time to recorded files.
1. Tap / to set the date and time.
2. Tap the displayed date format to use.
• mm/dd/yy: month/day/year
• dd/mm/yy: day/month/year
• yy/mm/dd: year/month/day
3. Tap “Done”.
This confirms the set date and time and opens the Projects Screen. Create a new project. (→ Creating
new projects using templates and Creating empty projects using specific settings)
NOTE:
If power is not supplied by an AC adapter for a long time, date and time settings will be reset. If the date and
time setting screen appears during startup, set them again.
27
To Next Page
Loading...
