Rendering projects as WAV files
Projects can be rendered in the following format to the AUDIO folder on an SD card or the ZOOM_R20 >
AUDIO folder on a USB flash drive.
• Stereo WAV file
• Sample rate: 44.1 kHz
• Bit depth: As set during project creation (→ Creating empty projects using specific settings)
NOTE:
To render to a USB flash drive, connect it to the USB (Type-C) port. (→ Connecting USB flash drives)
1. Tap “Rendering” on the Project Settings Screen (→ Opening the Project Settings Screen).
2. Slide the Length slider or tap and .
This adjusts the length rendered from the beginning of the project.
❶
Rendered length
This shows the number of bars.
133
To Next Page
Loading...
