Making preparations
Inserting SD cards
1. Turn the power off and then open the SD card slot cover.
2. Insert the SD card into the SD card slot.
To remove an SD card, push it further into the slot and then pull it out.
NOTE:
• Cards that conform to SDHC and SDXC specifications are supported.
• Always make certain that the power is off when inserting or removing SD cards. Inserting or removing a
card while the power is on could result in data loss.
• When inserting an SD card, be sure to insert the correct end with the top side up.
• Recording and playback are not possible when an SD card is not loaded in the R20.
• After purchasing a new SD card, always format it using the R20 to maximize performance. (→ Formatting
SD cards)
22
To Next Page
Loading...
