Zoom R20 - Page 18

• When the track type is , this opens the Synth Type Selection Screen.
❺
Edit button
• When the track type is – or , this opens the Wave Editor Screen.
• When the track type is , this opens the Piano Roll Screen.
❻
(Track View Screen only) UNDO/REDO button
This undoes the last operation.
• : This undoes the last operation (UNDO function).
(When is shown, the UNDO function cannot be used.)
• : This redoes the undone operation. (REDO function)
(Level Meter View Screen only) Mixdown button
Use this to mix down recordings.
❼
Track Switching button
Select which tracks receive audio from INPUTS 1–8 and can be operated with the physical controls.
• Tracks 1–8 can be operated.
• Tracks 9–16 can be operated.
❽
Screen Switching button
This switches between the Track View Screen and Level Meter View Screen.
• : This opens the Level Meter View Screen.
• : This opens the Track View Screen.
❾
Marker button
This opens the Marker Menu.
❿
Project Settings button
This opens the Project Settings Screen.
⓫
Ruler
This shows bars, beats, the recording/playback header and markers.
Pinch in/out horizontally to zoom out/in on the timeline.
⓬
Recording/playback Header
This shows the recording/playback position During recording, it appears red.
During playback, drag this horizontally to change the playback position.
18