Zoom UAC-232 - Using ZOOM UAC-232 Mix Control; Mix Control Software Installation & Interface

Using ZOOM UAC-232 Mix Control
ZOOM UAC-232 Mix Control is an application designed to control the internal mixer settings of the
UAC-232, including levels for direct monitoring and the streaming mixer.
Installing ZOOM UAC-232 Mix Control
Windows/Mac computers
1. Download ZOOM UAC-232 Mix Control from the ZOOM website (zoomcorp.com).
2. Follow the instructions and install ZOOM UAC-232 Mix Control.
HINT:
• The latest version of ZOOM UAC-232 Mix Control can be downloaded from the above website.
• Download the version of ZOOM UAC-232 Mix Control for the operating system being used.
iOS/iPadOS devices
1. Open the App Store on the iOS/iPadOS device and search for “UAC-232 Mix Control”.
2. Tap “GET” on the UAC-232 Mix Control screen.
This will install UAC-232 Mix Control.
NOTE:
If a DAW or another app that uses MIDI ports is already running, the MIDI ports for ZOOM UAC-232 Mix
Control will be used and proper connection might not be possible.
Either launch ZOOM UAC-232 Mix Control before the other application or change the settings of that
application so that it does not use MIDIIN2/MIDIOUT2 (ZOOM UAC-232 MIDI).
27