Overview of Music and Streaming modes
Set this according to the use of the USB audio signal path.
Music mode
The Music mode setting is good for making music with a DAW, for example.
Set to Music in ZOOM UAC-232 Mix Control. (Music mode is enabled when the unit is first used
after purchase or initialization.)
This mode is useful for recording a guitar and vocals simultaneously to separate tracks, for example. Input
sounds are handled as separate signals by the computer or iOS/iPadOS device in the same way as with an
ordinary audio interface.
In this mode, and can be used to adjust the direct monitoring mix. (→ Adjusting direct
monitoring)
INPUT1
DAW
INPUT2
OUTPUT 1/2
→ Use example: Making music
31
To Next Page
