36
37
2. Tap a thumbnail to open that app.
Note: You can swipe a thumbnail le or right or tap on the
corner of the thumbnail to remove it from the list. Tap Clear all to
remove all of the thumbnails.
Using Two Apps in Split-Screen Mode
You can work with two apps at the same time in split-screen mode.
Note: Not all apps support split-screen mode.
Method One:
1. Press the Recent apps key to view your recently used apps.
2. Press and hold the tab of the rst app you want to use, and
then drag it to Drag here to use split screen.
3. If the second app you want to use is in the recent apps list, tap
its tab. If not, from the home screen, tap to nd and open
the app you need.
Method Two:
1. Open the rst app you want to use, and then press and hold
the Recent apps key.
2. Find and open the second app you want to use, either by
pressing the Recent apps key and tapping a tab or by
tapping .
To turn o split-screen mode, drag to the top or bottom of
the screen.
Connecting to Networks and Devices
Connecting to Mobile Networks
Controlling Mobile Data Use
To enable or disable data access:
1. From the home screen, tap Settings Mobile networks
Mobile Networks.
2. Slide the Mobile Data switch to enable or disable mobile
data use.
To get data services when roaming:
1. From the home screen, tap Settings Mobile networks
International Data Roaming.
2. Slide the Mobile Data switch to enable or disable roaming.
Note: Data roaming may incur signicant roaming charges.
Setting Access Point Names
You can use the default Access Point Names (APNs) to connect
to the Internet. To add a new APN, you may need to contact your
service provider for the required information.
1. From the home screen, tap Settings Mobile networks
Access Point Names.
2. Tap .
3. Tap each item to enter the required information.
4. Tap Save.
Note: To set the APN to default settings, tap Reset to
default CONTINUE.
KNOWING THE BASICS CONNECTING TO NETWORKS AND DEVICES
To Next Page
Loading...
Need help?
General