6
CONTENTS 7GETTING STARTED
Getting Started
Installing the Nano-SIM Card
and microSDXC Card
You can use one nano-SIM card and one
microSDXC card (optional, not included).
Power o your phone before installing
or replacing the nano-SIM card or
microSDXC card. Unmount the
microSDXC card before removing it.
Warning! To avoid damage to the phone,
do not use other kinds of SIM cards or
a non-standard nano-SIM card cut from a
SIM card. You can obtain the standard
nano-SIM card from your service provider.
1. Insert the tip of the tray eject tool
into the hole on the card tray. Pull
the tray out.
2. Place the nano-SIM card and the
microSDXC card on the tray with the
gold-colored contacts facing down.
3. Carefully slide the tray back into place.
Charging the Battery
Your phone’s battery should have enough power for the phone
to turn on, nd a signal, and make a few calls. You should fully
charge the battery as soon as possible.
For Your Safety ...............................................124
General Safety Information ................................124
FCC RF Exposure Information (SAR) ........................ 125
FCC Regulations ............................................126
Hearing Aid Compatibility (HAC) Regulations
for Mobile Phones .......................................... 127
Distraction .................................................. 129
Product Handling ...........................................129
Electrical Safety ............................................ 133
CTIA Requirements ......................................... 133
Radio Frequency Interference .............................. 135
Explosive Environments ....................................136
Warranty ...................................................... 137
Limited Warranty ...........................................138
How to Get Warranty Service ..............................139
Other Warranty Programs ..................................139
Specications .................................................140