ZTE H108N V.2.1 Configuration manual
Page 44 ZTE Proprietary and Confidential
When a router is in Registar mode, the client should
be in Enrollee mode, and vice versa. Keep reading
for more info on “Registrar” mode.
When Configured state is selected, wireless
parameters (for example, the encryption password)
are provided by the CPE in WPS negotiation. When
Unconfigured state is selected, wireless
parameters are provided by the connecting user end
(for example, PC).
Press the button, the CPE will connect the station
automatically without password.
You need to enter the PIN of the enrollee.
If the router is in “enrollee mode”, you can press the
“PIN” button and the router will generate one valid
PIN for you. Not all PIN numbers are valid.
When Registrar mode is chosen, the following page appears. In this condition,
only PIN button can be used.
The following table describes the parameters of this page.
To Next Page
Loading...
