H3140 Maintenance Management Guide
Figure 4-12 Filter Switch and Mode Configuration Page
3. Configure filter switch and mode configuration parameters, see Table 4-7 .
Table 4-7 Parameter Descriptions for the Filter Switch and Mode Configuration
Parameter Description
URL Filter Set radiobox On to enable the URL filter function.
Mode Enable the URL filter function.
There are two modes:
Black List
Addresses in the URL Filter list are not allowed to access.
White List
Only addresses in the URL Filter list can be accessed.
4. Click Apply button to apply the changes.
Configure the URL Filter
5. Click URL Filter to open URL Filter page, see Figure 4-13.
Figure 4-13 URL Filter Page
6. Table 4-8 lists the URL filter parameters.
Table 4-8 Parameter Descriptions for the URL Filter
Parameter Description
Name The name of the URL filter.
URL The URL address.
7. Click Apply button to apply the changes.
28 SJ-20210621164956-009 | 2021-12-07(R1.0)