27
The HT physical Mode parameters are shown below:
• Operating Mode: In Mixed Mode, packets are transmitted with
a preamble compatible with the legacy 802.11a/g, the rest of
the packet has a new format. In Green Field, high throughput
packets are transmitted without a legacy compatible part.
• Channel Bandwidth: Set the HT physical channel bandwidth.
• Guard Interval: Guard interval is to introduce immunity to
propagation delays, echoes and reections, to which digital data
is normally very sensitive.
• MCS: The Modulation and Coding Scheme (MCS) is a value
that determines the modulation, coding and number of spatial
channels.
• Reverse Direction Grant(RDG): Enable RDG or not.
• Extension Channel: Set extension channel. Extension channel
is also able to send and receive data.
• Aggregation MSDU(A-MSDU) :To enable Hyper Throughput TX
Aggregate MAC Service Data Unit, select Enable.
• Auto Block ACK: Select to block ACK (Acknowledge Number)
or not during data transferring. When you enable the WDS
function, you should set to enable Auto block ACK to preventing
the other effect during data transferring.
• Decline BA Request: Select to reject peer BA-Request or not.
Click Apply to conrm your conguration.
Advanced
Select Wi-Fi Setting > Advanced, the advanced wireless network
parameters are shown in the following gure:
To Next Page
Loading...
Need help?
General
