Zte MF30 - Page 55

55
 Default Policy: Set how to handle the packet if none of the rules
matches.
 MAC address: Set the MAC address that will be filtered.
 Dest IP Address: Set the destination IP address that will be filtered.
 Source IP Address: Set the source IP address that will be filtered.
 Protocol: Set which protocol will be used for filtering.
 Dest Port Range: Set the destination port numbers that will be filtered
 Source Port Range: Set the source port numbers that will be filtered.
 Action: Set how to handle the packet if it matches with the rule.
 Comment: type comment for the filter settings.
Note：Filtering rules are matched one by one, if met this provision, it will not
continue to match the rules listed below.