Zte ZXHN H3600 - Configure the LAN

ZXHN H3600 Maintenance Management Guide
3. Click Apply button to apply the changes.
6.3 Configure the LAN
6.3.1 Configure the LAN(IPv4)
The section describes how to configure LAN(IPv4).
The relevant information of Internet status includes Allocated Address(DHCP), DHCP
Server, DHCP Binding and Port Control.
Steps
Check the Allocated Address(DHCP)
1. On the main page of the ZXHN H3600, select Local Network > LAN > IPv4 to the
IPv4 page.
2. Click Allocated Address(DHCP) to the configuration, see Figure 6-7.
Figure 6-7 Allocated Address(DHCP) Page
3. Click Refresh to refresh the informations.
Configure the DHCP Server
1. Click DHCP Server to the configuration, see Figure 6-8.
54 SJ-20201203151144-003 | 2021-06-16(R1.0)